Instruction manual for Vostok watches

In order to provide longer life and optimal work of Vostok watch we ask you to read the present instruction carefully.

Winding mechanism.

While wearing watch on your hand every day there's no need to wind it up. Watch running is provided by a special mechanism of automatic self-winding up, which makes your watch run thanks to movement of your hand.
But if you do not wear your watch more than 24 hours it's necessary to wind it up.

Unscrew the winding head counter clockwise from the case - position 2 and start winding clockwise by turning winding head on 25-30 revolutions, slightly delaying the head from the case.

Having finished winding up it's necessary to stop turning the winding head in order to avoid breakage of the mechanism.

Best way to winding up automatic watch is wearing it on your hand.
Do not lower the watch into water if the winding head is not in position 1. (Position 1 - the winding head is screwed on completely on the case).

Adjusting of the time.

Set the winding head into position 3, pulling it till a click. Turning the winding head counter clockwise set correct time. Having set the correct time screw up the winding head into position 1 on the case.

Updating of a calendar.

Set the winding head into position 3. Set the correct date by turning watch head clockwise. After that, set the winding head into position 1.
The accelerated updating of a calendar.

Set the winding head into position 3. Moving the winding head from figure "12" to figure "8" counter clockwise and then from figure "8" to figure "12" set the correct date. After that, set the winding head into position 1.

Notes on care of the watch:

- watches should be protected from shocks, influences of chemical products and influences of magnetic fields;
- for prevention of misted over under glass it is necessary to supervise, that the winding head was screwed well up;
- in order to avoid penetration of dust and a dirty in the mechanism forbidden to open back cover of the case.